2024 p460e Range Rover Sport L461 towbar installation.
We have installed a detachable swan neck towbar with 13pin Land Rover dedicated (vehicle specific) wiring. The car recognises when the vehicle is hitched up and changes various vehicle settings to make towing safer.
We also supply the new towing panel (lower central bumper diffuser) which is shaped to accommodate the new detachable towbar. We return the original lower central bumper diffuser to the customer for future fitment (if required).
Step by Step guide:
- Remove entire bumper
- Remove boot floor trims
- Remove OE crash beam (return to customer)
- Install new towbar
- Install towing electrics
- Remove OE lower central bumper diffuser from main bumper
- Install new lower central bumper diffuser to main bumper
- Complete test and checks
- Rebuild vehicle
- Return OE crash beam and OE lower central bumper diffuser to customer
All photos are taken during and post towbar installation so give a true representation of the finished look.
This Range Rover Sport L461 tow bar installation takes around 4 hours at our workshop in Bristol, UK.
2024 Nissan Qashqai J12 towbar installation. We have installed a detachable swan neck towbar with 13pin Nissan dedicated (vehicle specific) wiring.
No bumper modifications are required.
All photos are taken post towbar installation so give a true representation of the finished look.
This Nissan Qashqai tow bar installation takes around 4 hours at our workshop in Bristol, UK.
2024 BMW iX1 detachable towbar fitting.
We have installed a detachable tow bar to the new BMW iX1 fully electric SUV. Using a 13pin BMW dedicated wiring harness and fully removable swan neck towbar. The removable towbar neck is removed in seconds and leaves the car looking like it has no towbar fitted.
The underside of the bumper needs modification but not visible unless underneath the car.
This towbar installation took around 3.5 hours at our workshop in Bristol.
Please note we do not post towbar parts.
2020 BMW X3 M Competition (G01) detachable towbar Fitting. A detachable swan neck towbar accompanied by a BMW dedicated wiring loom configured for general towing.
Minor modifications made to the central bumper diffuser only.
Allow around 4 hours at our towbar workshop in Bristol.
We do not mail order parts.
2024 Transit Custom towbar fitting.
Latest 2024 model Ford Transit Custom (V710 / NXN / NRN) model installed with a Fixed Flange towbar and 13pin Trailer electrics using a Ford Dedicated wiring loom which we code to the vehicle.
This towbar did not interfere with the parking sensors nor did we have to cut or modify the bumper even though it had a Projex rear diffuser installed.
We also have Fixed and Detachable swan neck towbars available for this vehicle.
Allow 3 hours for instalaltion at our Bristol towbar workshop.
We do not supply parts.
2024 Peugeot 308 SW Estate towbar fitting
Peugeot 308 SW Estate installed with a Westfalia detachable towbar and 13pin cycle carrier electrics.
We have used a Peugeot dedicated wiring kit which we code to the cars ECU, This unlocks the additional towing features the car is equipped with.
Very little can be seen once towbar is detached and electric socket rotated upwards.
All photos are taken post towbar installation.
Fitting takes around 4 hours at our towbar workshop in Bristol.
2024 VW Golf mk8 R towbar installation.
Volkswagen Golf Estate R mk8 installed with a detachable towbar and 7pin trailer electrics.
We have used a VW dedicated wiring kit which we code to the cars ECU, this unlocks the additional towing features the car is equipped with.
Very little can be seen once towbar is detached and electric socket rotated upwards. Very minor rear bumper diffuser modification required, This is on the underside only so not visible.
All photos are taken post towbar installation.
Fitting takes around 4 hours at our towbar workshop in Bristol.
2020 Ford Puma ST Line towbar fitting.
Ford Puma ST Line installed with a Westfalia detachable towbar and 13pin cycle carrier electrics.
We have used a Ford dedicated wiring kit which we code to the cars ECU, this unlocks the additional towing features the car is equipped with.
Very little can be seen once towbar is detached and electric socket rotated upwards. Very minor rear bumper diffuser modification required, This is on the underside only so not visible.
All photos are taken post towbar installation.
Fitting takes around 4 hours at our towbar workshop in Bristol.
2024 Nissan X-Trail T33 towbar installation.
Nissan x trail epower e4orce installed with a detachable towbar and 13pin caravan electrics. We have used a Nissan dedicated wiring kit.
Very little can be seen once towbar is detached and electric socket rotated upwards. We have modified the rear bumper diffuser, this is on the underside only so not visible.
All photos are taken post towbar installation.
Fitting takes around 4 hours at our towbar workshop in Bristol.
2021 Hyundai Santa Fe mk4 towbar fitting. This is the facelifted 2021 onwards Santa Fe model.
We have installed a Witter detachable swan neck towbar and 13pin fully populated caravan electrics using Hyundai Dedicated wiring loom.
No need to make any bumper modifications.
